Description
The AeroTech Disposable Motor System DMS is a single-use motor in kit form that is assembled by the user. All of the Aerotech DMS motors use all-disposable components. The nozzle and propellant are already installed. You will need to set the desired delay time using the Universal Delay Drilling Tool (UDDT), Not Included, and then pour in the ejection charge. The Universal Delay Drilling Tool (UDDT) is required to adjust to a shorter time delay on all DMS rocket motors and is available in the AeroTech Accessories section of this website.
DMS motors feature a filament-wound fiberglass casing, a glass-reinforced composite phenolic nozzle, a molded plastic bulkhead and RCSs exclusive White Lightning™ aerospace grade composite propellant formulation, which produces a brilliant white flame with lots of dense white smoke and a throaty roar at lift-off.
This AeroTech motor pack comes with 1 rocket motor and 1 FirstFire™ Initiator.
Motor Diameter: 2.125 inches (54mm)
Casing Length: 25 inches (635mm)
Total Impulse: 2714 N-sec
Average Thrust: 1000 newtons
Peak Thrust: 1261 N-sec
Thrust Duration: 2.7 seconds
Delay Time: adjustable up to 18 seconds
Propellant Weight: 1400 grams
Motor Weight: 2194 grams
